Linux 中ip forward功能是一个比较方便实用的功能,只需要简单配置,添加几条路由,即可实现ip转发。本文基于CentOS 7下采取一台机器充当虚拟路由,来实现Windows环境与Linux环境中相互通信。具体见下文,供大家参考。

一、环境及需求说明

CentOS7下如何配置ip forward(虚拟路由器)

本地测试环境,由于Win7+VMware这台机器网卡太新,无法被VMware EXSi识别,无奈之下就直接装了个Win7,然后再上面基于Vmware workstation 12开启了一些临时测试的虚拟机。其次本地直连网段192.168.1.0 IP有限,而又希望直接从本机(如图Win10) ssh连接到这些虚拟机,因此考虑使用Linux的ip转发功能来实现。

上述图片中已经列出了各个节点的IP信息,红色的虚拟机充当软路由,配置好之后,实现Win10 直接ssh到虚拟机。

二、虚拟路由服务器配置

###查看网卡信息
[root@centos7-router ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
  inet6 ::1/128 scope host 
   valid_lft forever preferred_lft forever
2: eno16777728: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
  link/ether 00:0c:29:9c:eb:2d brd ff:ff:ff:ff:ff:ff
  inet 172.24.8.254/24 brd 172.24.8.255 scope global eno16777728
   valid_lft forever preferred_lft forever
  inet6 fe80::20c:29ff:fe9c:eb2d/64 scope link 
   valid_lft forever preferred_lft forever
3: eno33554960: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
  link/ether 00:0c:29:9c:eb:37 brd ff:ff:ff:ff:ff:ff
  inet 192.168.1.175/24 brd 192.168.1.255 scope global dynamic eno33554960
   valid_lft 82384sec preferred_lft 82384sec
  inet6 fe80::20c:29ff:fe9c:eb37/64 scope link 
   valid_lft forever preferred_lft forever

###查看路由表
[root@centos7-router ~]# route -n
Kernel IP routing table ###缺省情况下,每块网卡都有一个基于本网段的路由记录
Destination  Gateway    Genmask    Flags Metric Ref  Use Iface
0.0.0.0    192.168.1.1  0.0.0.0    UG  100  0    0 eno33554960
172.24.8.0   0.0.0.0    255.255.255.0 U  100  0    0 eno16777728
192.168.1.0  0.0.0.0    255.255.255.0 U  100  0    0 eno33554960

###使用ip命令方式查看路由
[root@centos7-router ~]# ip route list
default via 192.168.1.1 dev eno33554960 proto static metric 100 
172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.254 metric 100 
192.168.1.0/24 dev eno33554960 proto kernel scope link src 192.168.1.175 metric 100 

###开启ip forward
[root@centos7-router ~]# cp /usr/lib/sysctl.d/50-default.conf /usr/lib/sysctl.d/50-default.conf.bk
[root@centos7-router ~]# echo "net.ipv4.ip_forward = 1" /usr/lib/sysctl.d/50-default.conf
[root@centos7-router ~]# grep ip_forward /usr/lib/sysctl.d/50-default.conf
net.ipv4.ip_forward = 1
[root@centos7-router ~]# sysctl -p ###如不生效重启一下OS

三、CentOS7-a主机下添加路由

###查看当前主机ip 信息
[root@centos7-a ~]# ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
  inet6 ::1/128 scope host 
   valid_lft forever preferred_lft forever
2: eno16777728: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
  link/ether 00:0c:29:57:26:9d brd ff:ff:ff:ff:ff:ff
  inet 172.24.8.131/24 brd 172.24.8.255 scope global dynamic eno16777728
   valid_lft 1088sec preferred_lft 1088sec
  inet6 fe80::20c:29ff:fe57:269d/64 scope link 
   valid_lft forever preferred_lft forever

###查看当前主机路由信息   
[root@centos7-a ~]# ip route list
172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.131 metric 100 

[root@centos7-a ~]# # Author : Leshami
[root@centos7-a ~]# # Blog : http://blog.csdn.net/leshami
[root@centos7-a ~]# ip route add default via 172.24.8.254
[root@centos7-a ~]# ip route list
default via 172.24.8.254 dev eno16777728 
172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.131 metric 100 

###测试到虚拟路由器网关ip连通性
[root@centos7-a ~]# ping 172.24.8.254 -c 2       
PING 172.24.8.254 (172.24.8.254) 56(84) bytes of data.
64 bytes from 172.24.8.254: icmp_seq=1 ttl=64 time=0.268 ms
64 bytes from 172.24.8.254: icmp_seq=2 ttl=64 time=0.302 ms

--- 172.24.8.254 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.268/0.285/0.302/0.017 ms

###测试到虚拟路由器ip连通性
[root@centos7-a ~]# ping 192.168.1.175 -c 2
PING 192.168.1.175 (192.168.1.175) 56(84) bytes of data.
64 bytes from 192.168.1.175: icmp_seq=1 ttl=64 time=0.475 ms
64 bytes from 192.168.1.175: icmp_seq=2 ttl=64 time=0.443 ms

--- 192.168.1.175 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.443/0.459/0.475/0.016 ms

四、Windows 10下配置路由

###当前环境
C:\>systeminfo | findstr Build
OS Version:        10.0.14393 N/A Build 14393
OS Build Type:      Multiprocessor Free

###查看当前的路由信息
C:\>route print -4
===========================================================================
Interface List
 7...54 ab 3a xx b8 ea ......Intel(R) Ethernet Connection I219-V
21...ac 2b 6e 5f 3b 57 ......Microsoft Wi-Fi Direct Virtual Adapter
            ......
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination    Netmask     Gateway   Interface Metric
     0.0.0.0     0.0.0.0   192.168.1.1  192.168.1.242  35
    127.0.0.0    255.0.0.0    On-link    127.0.0.1  331
    127.0.0.1 255.255.255.255    On-link    127.0.0.1  331
 127.255.255.255 255.255.255.255    On-link    127.0.0.1  331
   172.24.10.0  255.255.255.0    On-link   172.24.10.1  291
   172.24.10.1 255.255.255.255    On-link   172.24.10.1  291
  172.24.10.255 255.255.255.255    On-link   172.24.10.1  291
   192.168.1.0  255.255.255.0    On-link  192.168.1.242  291
  192.168.1.242 255.255.255.255    On-link  192.168.1.242  291
  192.168.1.255 255.255.255.255    On-link  192.168.1.242  291
  192.168.16.0  255.255.255.0    On-link   192.168.16.1  291
  192.168.16.1 255.255.255.255    On-link   192.168.16.1  291
 192.168.16.255 255.255.255.255    On-link   192.168.16.1  291
    224.0.0.0    240.0.0.0    On-link    127.0.0.1  331
    224.0.0.0    240.0.0.0    On-link  192.168.1.242  291
    224.0.0.0    240.0.0.0    On-link   192.168.16.1  291
    224.0.0.0    240.0.0.0    On-link   172.24.10.1  291
 255.255.255.255 255.255.255.255    On-link    127.0.0.1  331
 255.255.255.255 255.255.255.255    On-link  192.168.1.242  291
 255.255.255.255 255.255.255.255    On-link   192.168.16.1  291
 255.255.255.255 255.255.255.255    On-link   172.24.10.1  291
===========================================================================
Persistent Routes:
 None

###添加持久化路由 
C:\>route add 172.24.8.0 mask 255.255.255.0 192.168.1.175 -p
OK!

C:\>route print -4

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination    Netmask     Gateway   Interface Metric
     0.0.0.0     0.0.0.0   192.168.1.1  192.168.1.242  35
    127.0.0.0    255.0.0.0    On-link    127.0.0.1  331
    127.0.0.1 255.255.255.255    On-link    127.0.0.1  331
 127.255.255.255 255.255.255.255    On-link    127.0.0.1  331
   172.24.8.0  255.255.255.0  192.168.1.175  192.168.1.242  36
   172.24.10.0  255.255.255.0    On-link   172.24.10.1  291
   172.24.10.1 255.255.255.255    On-link   172.24.10.1  291
  172.24.10.255 255.255.255.255    On-link   172.24.10.1  291
   192.168.1.0  255.255.255.0    On-link  192.168.1.242  291
  192.168.1.242 255.255.255.255    On-link  192.168.1.242  291
  192.168.1.255 255.255.255.255    On-link  192.168.1.242  291
  192.168.16.0  255.255.255.0    On-link   192.168.16.1  291
  192.168.16.1 255.255.255.255    On-link   192.168.16.1  291
 192.168.16.255 255.255.255.255    On-link   192.168.16.1  291
    224.0.0.0    240.0.0.0    On-link    127.0.0.1  331
    224.0.0.0    240.0.0.0    On-link  192.168.1.242  291
    224.0.0.0    240.0.0.0    On-link   192.168.16.1  291
    224.0.0.0    240.0.0.0    On-link   172.24.10.1  291
 255.255.255.255 255.255.255.255    On-link    127.0.0.1  331
 255.255.255.255 255.255.255.255    On-link  192.168.1.242  291
 255.255.255.255 255.255.255.255    On-link   192.168.16.1  291
 255.255.255.255 255.255.255.255    On-link   172.24.10.1  291
===========================================================================
Persistent Routes: ###以下为添加的持久化路由记录
 Network Address     Netmask Gateway Address Metric
   172.24.8.0  255.255.255.0  192.168.1.175   1 
===========================================================================

五、验证两边连通性

###从Linux端ping windows 10
[root@centos7-a ~]# ping 192.168.1.242 -c 2   
PING 192.168.1.242 (192.168.1.242) 56(84) bytes of data.
64 bytes from 192.168.1.242: icmp_seq=1 ttl=63 time=1.70 ms
64 bytes from 192.168.1.242: icmp_seq=2 ttl=63 time=1.10 ms

--- 192.168.1.242 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1002ms
rtt min/avg/max/mdev = 1.101/1.404/1.707/0.303 ms

###从windows 10端ping Linux
C:\>ping 172.24.8.131 -t

Pinging 172.24.8.131 with 32 bytes of data:
Reply from 172.24.8.131: bytes=32 time=1ms TTL=63
Reply from 172.24.8.131: bytes=32 time=1ms TTL=63

注,如果测试有问题,请考虑是否被防火墙拦住。

以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持。

标签:
CentOS7配置ip,forward,配置ip,forward,CentOS配置ip,forward

免责声明:本站文章均来自网站采集或用户投稿,网站不提供任何软件下载或自行开发的软件! 如有用户或公司发现本站内容信息存在侵权行为,请邮件告知! 858582#qq.com
狼山资源网 Copyright www.pvsay.com

评论“CentOS7下如何配置ip forward(虚拟路由器)”

暂无“CentOS7下如何配置ip forward(虚拟路由器)”评论...

P70系列延期,华为新旗舰将在下月发布

3月20日消息,近期博主@数码闲聊站 透露,原定三月份发布的华为新旗舰P70系列延期发布,预计4月份上市。

而博主@定焦数码 爆料,华为的P70系列在定位上已经超过了Mate60,成为了重要的旗舰系列之一。它肩负着重返影像领域顶尖的使命。那么这次P70会带来哪些令人惊艳的创新呢?

根据目前爆料的消息来看,华为P70系列将推出三个版本,其中P70和P70 Pro采用了三角形的摄像头模组设计,而P70 Art则采用了与上一代P60 Art相似的不规则形状设计。这样的外观是否好看见仁见智,但辨识度绝对拉满。